Gecko [ dataharbor.africa ]

Name	Size	Permission
?;ietf	[ DIR ]	drwxr-xr-x
?;site	[ DIR ]	drwxr-xr-x
?;tubs	[ DIR ]	drwxr-xr-x
ACCESSBIND-PIB	76.43 KB	-rw-r--r--
ACCESSBIND-PIB-orig	51.48 KB	-rw-r--r--
ACCOUNTING-FRAMEWORK-PIB	9.26 KB	-rw-r--r--
ACCOUNTING-FRAMEWORK-PIB-orig	9.19 KB	-rw-r--r--
COPS-PR-SPPI	12.78 KB	-rw-r--r--
COPS-PR-SPPI-TC	3.91 KB	-rw-r--r--
DIFFSERV-PIB	97.13 KB	-rw-r--r--
FEEDBACK-FRAMEWORK-PIB	32.41 KB	-rw-r--r--
FEEDBACK-FRAMEWORK-PIB-orig	32.27 KB	-rw-r--r--
FRAMEWORK-FEEDBACK-PIB	32.54 KB	-rw-r--r--
FRAMEWORK-PIB	75.56 KB	-rw-r--r--
FRAMEWORK-TC-PIB	10.16 KB	-rw-r--r--
IP-TE-PIB	29.49 KB	-rw-r--r--
IP-TE-PIB-orig	29.46 KB	-rw-r--r--
IPSEC-POLICY-PIB	134.14 KB	-rw-r--r--
IPSEC-POLICY-PIB-orig	134.06 KB	-rw-r--r--
LOAD-BALANCING-PIB	16.36 KB	-rw-r--r--
LOAD-BALANCING-PIB-orig	16.23 KB	-rw-r--r--
META-POLICY-PIB	28.01 KB	-rw-r--r--
META-POLICY-PIB-orig	27.41 KB	-rw-r--r--
MPLS-SETUP-PIB	33.53 KB	-rw-r--r--
MPLS-SETUP-PIB-orig	33.47 KB	-rw-r--r--
PARTITION-PIB	29.39 KB	-rw-r--r--
PARTITION-PIB-orig	28.15 KB	-rw-r--r--
POLICY-FRAMEWORK-PIB	8.46 KB	-rw-r--r--
POLICY-FRAMEWORK-PIB-orig	9.1 KB	-rw-r--r--
PPVPN-PIB	35.32 KB	-rw-r--r--
PPVPN-PIB-orig	35.18 KB	-rw-r--r--
QOS-POLICY-802-PIB	20.65 KB	-rw-r--r--
QOS-POLICY-802-PIB-orig	20.56 KB	-rw-r--r--
QOS-POLICY-IP-PIB	46.68 KB	-rw-r--r--
QOS-POLICY-IP-PIB-orig	46.69 KB	-rw-r--r--
RSVP-PCC-PIB	40.45 KB	-rw-r--r--
RSVP-PCC-PIB-orig	40.09 KB	-rw-r--r--
SLS-NEGOTIATION-PIB	25.42 KB	-rw-r--r--
SLS-NEGOTIATION-PIB-orig	24.85 KB	-rw-r--r--
UMTS-PIB	10.34 KB	-rw-r--r--
UMTS-PIB-orig	10.28 KB	-rw-r--r--

Code Editor : QOS-POLICY-802-PIB

QOS-POLICY-802-PIB PIB-DEFINITIONS ::= BEGIN

IMPORTS
    ibrpib FROM TUBS-SMI
    Unsigned32, Integer32,
    MODULE-IDENTITY, OBJECT-TYPE
            FROM SNMPv2-SMI
    TruthValue, PhysAddress,
    TEXTUAL-CONVENTION
            FROM SNMPv2-TC
    RoleCombination
            FROM POLICY-FRAMEWORK-PIB
    Dscp
            FROM QOS-POLICY-IP-PIB
    pib
            FROM COPS-PR-SPPI
    InstanceId
            FROM COPS-PR-SPPI-TC;

qosPolicy802Pib  MODULE-IDENTITY
    SUBJECT-CATEGORIES { all } -- to be assigned
    LAST-UPDATED "9906241800Z"
    ORGANIZATION "IETF RAP WG"
    CONTACT-INFO "
                  Michael Fine
                  Cisco Systems, Inc.
                  170 West Tasman Drive
                  San Jose, CA  95134-1706 USA
                  Phone: +1 408 527 8218
                  Email: mfine@cisco.com

Keith McCloghrie
                  Cisco Systems, Inc.
                  170 West Tasman Drive,
                  San Jose, CA 95134-1706 USA
                  Phone: +1 408 526 5260
                  Email: kzm@cisco.com

John Seligson
                  Nortel Networks, Inc.
                  4401 Great America Parkway
                  Santa Clara, CA 95054 USA
                  Phone: +1 408 495 2992
                  Email: jseligso@nortelnetworks.com"
    DESCRIPTION
            "The PIB module containing an initial set of policy
             rule classes that describe the quality of service
             (QoS) policies supported by devices for IEEE 802-
             based traffic."

::= { ibrpib 5 } -- to be assigned !

qosPolicy802PibClasses OBJECT IDENTIFIER ::= { qosPolicy802Pib 1 }

--
-- Textual Conventions
--

--
-- IEEE 802 CoS
--

QosIeee802Cos ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "An integer that is in the range of the IEEE 802 CoS
        values. This corresponds to the 802.1p priority values."

SYNTAX INTEGER (0..7)

--
-- General configuration information for the entire domain
--

qos802DomainConfig OBJECT IDENTIFIER ::= { qosPolicy802PibClasses 1 }

--
-- Differentiated Services Code Point Mapping Table
--
-- Supports the mapping of DSCP values to IEEE CoS values.
--

qos802DscpMappingTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF Qos802DscpMappingEntry
    PIB-ACCESS  install
    STATUS         current
    DESCRIPTION
        "Maps each DSCP to an QosIeee802Cos.  When configured
        for the first time, all 64 entries of the table must
        be specified. Thereafter, instances may be modified but
        not deleted unless all instances are deleted."

INSTALL-ERRORS {
        priInstNotComplete(1)    -- required instances not created
        }

::= { qos802DomainConfig 1 }

qos802DscpMappingEntry OBJECT-TYPE
    SYNTAX         Qos802DscpMappingEntry
    STATUS         current
    DESCRIPTION
        "An instance of the qos802DscpMapping class. A total of 64
        class instances are constantly maintained after initial device
        configuration."

PIB-INDEX { qos802DscpMappingId }
    ::= { qos802DscpMappingTable 1 }

Qos802DscpMappingEntry ::= SEQUENCE {
        qos802DscpMappingId           InstanceId,
        qos802DscpMappingDscp         Dscp,
        qos802DscpMapping802Cos       QosIeee802Cos
}

qos802DscpMappingId OBJECT-TYPE
    SYNTAX         InstanceId
    STATUS         current
    DESCRIPTION
        "A unique ID for this policy rule instance."

::= { qos802DscpMappingEntry 1 }

qos802DscpMappingDscp OBJECT-TYPE
    SYNTAX         Dscp
    STATUS         current
    DESCRIPTION
        "The DSCP class instance attribute that is used to
        determine the appropriate layer 2 CoS mappings. DSCP
        values 0 through 63 (inclusive) are maintained in
        the table."

::= { qos802DscpMappingEntry 2 }

qos802DscpMapping802Cos OBJECT-TYPE
    SYNTAX         QosIeee802Cos
    STATUS         current
    DESCRIPTION
        "The IEEE 802 CoS value to use when mapping the DSCP
        value specified by the qos802DscpMappingDscp attribute
        to a IEEE 802 CoS."

::= { qos802DscpMappingEntry 3 }

--
-- Layer 2 CoS-to-DSCP Mapping Table
--
-- Supports the mapping of IEEE CoS values to DSCP values
-- for generic QoS traffic classification
--

qos802CosToDscpTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF Qos802CosToDscpEntry
    PIB-ACCESS  install
    STATUS         current
    DESCRIPTION
        "Maps each of eight layer 2 CoS values to a DSCP.  When
        configured for the first time, all 8 entries of the table
        must be specified. Thereafter, instances may be modified
        but not deleted unless all instances are deleted."

INSTALL-ERRORS {
        priInstNotComplete(1)    -- required instances not created
        }

::= { qos802DomainConfig 2 }

qos802CosToDscpEntry OBJECT-TYPE
    SYNTAX         Qos802CosToDscpEntry
    STATUS         current
    DESCRIPTION
        "An instance of the qosCosToDscp class. A total of 8
        class instances are constantly maintained after initial
        device configuration."

PIB-INDEX { qos802CosToDscpId }
    ::= { qos802CosToDscpTable 1 }

Qos802CosToDscpEntry ::= SEQUENCE {
        qos802CosToDscpId   InstanceId,
        qos802CosToDscpCos  QosIeee802Cos,
        qos802CosToDscpDscp Dscp
}

qos802CosToDscpId OBJECT-TYPE
    SYNTAX         InstanceId
    STATUS         current

DESCRIPTION
        "A unique index for this policy rule instance."

::= { qos802CosToDscpEntry 1 }

qos802CosToDscpCos OBJECT-TYPE
    SYNTAX         QosIeee802Cos
    STATUS         current
    DESCRIPTION
        "The layer 2 CoS class instance attribute that is used to
        determine the appropriate DSCP mappings. CoS values 0
        through 7 (inclusive) are maintained in the table."

::= { qos802CosToDscpEntry 2 }

qos802CosToDscpDscp OBJECT-TYPE
    SYNTAX         Dscp
    STATUS         current
    DESCRIPTION
        "The DSCP value to use when mapping the layer 2 CoS value
        specified by the qosCosToDscp attribute to a DSCP."

::= { qos802CosToDscpEntry 3 }

--
-- The IEEE 802 Classification and Policing Group
--

qos802Qos OBJECT IDENTIFIER ::= { qosPolicy802PibClasses 2 }

--
-- The IEEE 802 ACE Table
--
-- The IEEE 802 ACE Table supports the specification of IEEE
-- 802-based (e.g., 802.3) information that is used to perform
-- traffic classification.
--

qos802AceTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF Qos802AceEntry
    PIB-ACCESS  install
    STATUS         current
    DESCRIPTION
        "IEEE 802-based ACE definitions. A class that contains
        attributes of IEEE 802 (e.g., 802.3) traffic that form

an association that is used to perform traffic
        classification."

::= { qos802Qos 1 }

qos802AceEntry OBJECT-TYPE
    SYNTAX         Qos802AceEntry
    STATUS         current
    DESCRIPTION
        "IEEE 802-based ACE definitions.  An entry specifies
        (potentially) several distinct matching components. Each
        component is tested against the data in a frame
        individually. An overall match occurs when all of the
        individual components match the data they are compared
        against in the frame being processed. A failure of any
        one test causes the overall match to fail.

Wildcards may be specified for those fields that are not
        relevant."

PIB-INDEX { qos802AceId }
    ::= { qos802AceTable 1 }

Qos802AceEntry ::= SEQUENCE {
        qos802AceId              InstanceId,
        qos802AceDstAddr         PhysAddress,
        qos802AceDstAddrMask     PhysAddress,
        qos802AceSrcAddr         PhysAddress,
        qos802AceSrcAddrMask     PhysAddress,
        qos802AceVlanId          Integer32,
        qos802AceVlanTagRequired INTEGER,
        qos802AceEtherType       Integer32,
        qos802AceUserPriority    BITS,
        qos802AcePermit          TruthValue
}

qos802AceId OBJECT-TYPE
    SYNTAX         InstanceId
    STATUS         current
    DESCRIPTION
        "An arbitrary integer index that uniquely identifies this
        802 ACE among all of the 802 ACEs. Note that this identifier
        is used in instances of the qos802Acl class to associate a
        802 ACE with a 802 ACL. An active ACE/ACL association
        prohibits the deletion of the 802 ACE until the ACE/ACL

association is terminated. Class instances may not be
        contiguous."

::= { qos802AceEntry 1 }

qos802AceDstAddr OBJECT-TYPE
    SYNTAX         PhysAddress
    STATUS         current
    DESCRIPTION
        "The 802 address against which the 802 DA of incoming traffic
        streams will be compared. Frames whose 802 DA matches the
        physical address specified by this object, taking into account
        address wildcarding as specified by the qos802AceDstAddrMask
        object, are potentially subject to the processing guidelines
        that are associated with this entry through the related
        action class."

::= { qos802AceEntry 2 }

qos802AceDstAddrMask OBJECT-TYPE
    SYNTAX         PhysAddress
    STATUS         current
    DESCRIPTION
        "This object specifies the bits in a 802 destination address
        that should be considered when performing a 802 DA comparison
        against the address specified in the qos802AceDstAddr object.

The value of this object represents a mask that is logically
        and'ed with the 802 DA in received frames to derive the value
        to be compared against the qos802AceDstAddr address. A zero
        bit in the mask thus means that the corresponding bit in the
        address always matches. The qos802AceDstAddr value must also
        be masked using this value prior to any comparisons.

The length of this object in octets must equal the length in
        octets of the qos802AceDstAddr. Note that a mask with no bits
        set (i.e., all zeroes) effectively wildcards the
        qos802AceDstAddr object."

::= { qos802AceEntry 3 }

qos802AceSrcAddr OBJECT-TYPE
    SYNTAX         PhysAddress
    STATUS         current
    DESCRIPTION

"The 802 MAC address against which the 802 MAC SA of incoming
        traffic streams will be compared. Frames whose 802 MAC SA
        matches the physical address specified by this object,
        taking into account address wildcarding as specified by the
        qos802AceSrcAddrMask object, are potentially subject to the
        processing guidelines that are associated with this entry
        through the related action class."

::= { qos802AceEntry 4 }

qos802AceSrcAddrMask OBJECT-TYPE
    SYNTAX         PhysAddress
    STATUS         current
    DESCRIPTION
        "This object specifies the bits in a 802 MAC source address
        that should be considered when performing a 802 MAC SA
        comparison against the address specified in the
        qos802AceSrcAddr object.

The value of this object represents a mask that is logically
        and'ed with the 802 MAC SA in received frames to derive the
        value to be compared against the qos802AceSrcAddr address. A
        zero bit in the mask thus means that the corresponding bit
        in the address always matches. The qos802AceSrcAddr value
        must also be masked using this value prior to any
        comparisons.

The length of this object in octets must equal the length in
        octets of the qos802AceSrcAddr. Note that a mask with no bits
        set (i.e., all zeroes) effectively wildcards the
        qos802AceSrcAddr object."

::= { qos802AceEntry 5 }

qos802AceVlanId OBJECT-TYPE
    SYNTAX         Integer32 (-1 | 1..4094)
    STATUS         current
    DESCRIPTION
        "The VLAN ID (VID) that uniquely identifies a VLAN
        within the device. This VLAN may be known or unknown
        (i.e., traffic associated with this VID has not yet
        been seen by the device) at the time this entry
        is instantiated.

Setting the qos802AceVlanId object to -1 indicates that

VLAN data should not be considered during traffic
        classification."

::= { qos802AceEntry 6 }

qos802AceVlanTagRequired OBJECT-TYPE
    SYNTAX         INTEGER {
                       taggedOnly(1),
                       priorityTaggedPlus(2),
                       untaggedOnly(3),
                       ignoreTag(4)
                   }
    STATUS         current
    DESCRIPTION
        "This object indicates whether the presence of an
        IEEE 802.1Q VLAN tag in data link layer frames must
        be considered when determining if a given frame
        matches this 802 ACE entry.

A value of 'taggedOnly(1)' means that only frames
        containing a VLAN tag with a non-Null VID (i.e., a
        VID in the range 1..4094) will be considered a match.

A value of 'priorityTaggedPlus(2)' means that only
        frames containing a VLAN tag, regardless of the value
        of the VID, will be considered a match.

A value of 'untaggedOnly(3)' indicates that only
        untagged frames will match this filter component.

The presence of a VLAN tag is not taken into
        consideration in terms of a match if the value is
        'ignoreTag(4)'."

::= { qos802AceEntry 7 }

qos802AceEtherType OBJECT-TYPE
    SYNTAX         Integer32 (-1 | 0..'ffff'h)
    STATUS         current
    DESCRIPTION
        "This object specifies the value that will be compared
        against the value contained in the EtherType field of an
        IEEE 802 frame. Example settings would include 'IP'
        (0x0800), 'ARP' (0x0806) and 'IPX' (0x8137).

Setting the qos802AceEtherTypeMin object to -1 indicates
        that EtherType data should not be considered during traffic
        classification.

Note that the position of the EtherType field depends on
        the underlying frame format. For Ethernet-II encapsulation,
        the EtherType field follows the 802 MAC source address. For
        802.2 LLC/SNAP encapsulation, the EtherType value follows the
        Organization Code field in the 802.2 SNAP header. The value
        that is tested with regard to this filter component therefore
        depends on the data link layer frame format being used. If
        this 802 ACE component is active when there is no EtherType
        field in a frame (e.g., 802.2 LLC), a match is implied."

::= { qos802AceEntry 8 }

qos802AceUserPriority OBJECT-TYPE
    SYNTAX         BITS {
                        matchPriority0(0),
                        matchPriority1(1),
                        matchPriority2(2),
                        matchPriority3(3),
                        matchPriority4(4),
                        matchPriority5(5),
                        matchPriority6(6),
                        matchPriority7(7)
                   }
    STATUS         current
    DESCRIPTION
        "The set of values, representing the potential range
        of user priority values, against which the value contained
        in the user priority field of a tagged 802.1 frame is
        compared. A test for equality is performed when determining
        if a match exists between the data in a data link layer
        frame and the value of this 802 ACE component. Multiple
        values may be set at one time such that potentially several
        different user priority values may match this 802 ACE
        component.

Setting all of the bits that are associated with this
        object causes all user priority values to match this
        attribute. This essentially makes any comparisons
        with regard to user priority values unnecessary. Untagged
        frames are treated as an implicit match."

::= { qos802AceEntry 9 }

qos802AcePermit OBJECT-TYPE
    SYNTAX         TruthValue
    STATUS         current
    DESCRIPTION
        "If the frame matches this ACE and the value of this
        attribute is true, then the matching process terminates
        and the QoS associated with this 802-based ACE (indirectly
        through the 802 ACL) is applied to the packet.  If the
        value of this attribute is false, then no more 802 ACEs in
        this 802 ACL are compared to this packet and matching
        continues with the first 802-based ACE of the next 802 ACL."

::= { qos802AceEntry 10 }

--
-- The IEEE 802 ACL Definition Table
--
-- The IEEE 802 ACL Definition Table supports the association of
-- distinct IEEE 802-based (e.g., 802.3) traffic classification
-- specifications into an ordered list.
--

qos802AclDefinitionTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF Qos802AclDefinitionEntry
    PIB-ACCESS  install
    STATUS         current
    DESCRIPTION
        "IEEE 802-based ACL definitions. A class that defines a
        set of 802 ACLs, each of which is comprised of an ordered
        list of 802 ACEs."

INSTALL-ERRORS {
        priPrecedenceConflict(1) -- precedence conflict detected
        }

::= { qos802Qos 2 }

qos802AclDefinitionEntry OBJECT-TYPE
    SYNTAX         Qos802AclDefinitionEntry
    STATUS         current
    DESCRIPTION
        "IEEE 802-based ACL definitions. An entry specifies an
        instance of this class that associates an 802 ACE with

a given 802 ACL. The evaluation order of distinct 802
        ACEs that are associated with a specific 802 ACL is
        specified as well."

PIB-INDEX { qos802AclDefinitionId }
    ::= { qos802AclDefinitionTable 1 }

Qos802AclDefinitionEntry ::= SEQUENCE {
        qos802AclDefinitionId       InstanceId,
        qos802AclDefinitionAclId    InstanceId,
        qos802AclDefinitionAceId    InstanceId,
        qos802AclDefinitionAceOrder Unsigned32
}

qos802AclDefinitionId OBJECT-TYPE
    SYNTAX         InstanceId
    STATUS         current
    DESCRIPTION
        "An arbitrary integer index that uniquely identifies this
        802 ACE / 802 ACL association."

::= { qos802AclDefinitionEntry 1 }

qos802AclDefinitionAclId OBJECT-TYPE
    SYNTAX         InstanceId
    STATUS         current
    DESCRIPTION
        "An index for this 802 ACL. Each 802 ACL in the device is
        assigned a unique integer index. There will (potentially) be
        multiple instances of the qos802AclDefinition class with this
        identifier, one for each 802 ACE that is associated with the
        specified 802 ACL.

For example, assume that 2 802 ACLs, each comprised of 4 802
        ACEs, have been installed. The instances of this class may
        appear as follows:

Index   AclId   AceId   AceOrder
                   10      6       4        1
                   11      6       5        2
                   12      6       9        23
                   13      6       11       24
                   65      18      5        8
                   66      18      9        12
                   67      18      13       15

70      18      14       16

Note that this identifier is used in instances of the
        qosAclTarget class to associate an 802 ACL with an interface
        set and action. An active ACL Target association prohibits
        the deletion of all of the qos802AclDefinition instances
        with a given qos802AclDefinitionAclId (i.e., at least one
        entry for the specific qos802AclDefinitionAclId must be
        present in this table) until the ACL Target association is
        terminated."

::= { qos802AclDefinitionEntry 2 }

qos802AclDefinitionAceId OBJECT-TYPE
    SYNTAX         InstanceId
    STATUS         current
    DESCRIPTION
        "This attribute identifies the 802 ACE in the qos802AceTable
        that is associated with the 802 ACL specified by
        qos802AclDefinitionAclId object. The corresponding instance
        in the qos802Ace class must exist prior to being associated
        with a 802 ACL.

Attempting to specify an unknown class instance will result
        in an appropriate error indication being returned to the
        entity that is attempting to install the conflicting entry.
        For example, a 'priUnknown(2)' error indication is returned
        to the policy server in this situation."

::= { qos802AclDefinitionEntry 3 }

qos802AclDefinitionAceOrder OBJECT-TYPE
    SYNTAX         Unsigned32
    STATUS         current
    DESCRIPTION
        "The precedence of the 802 ACE, identified via the
        qos802AclDefinitionAceId object, with regard to evaluation
        order. The precedence determines the order of evaluation of
        this ACE in relation to related 802 ACEs that are associated
        with an ACL. An ACE with a given precedence order in the
        access control list is evaluated before one with a higher-
        valued precedence order.

Precedence values within a group must be unique otherwise
        instance installation will be prohibited and an error

value will be returned.

Note that qos802AclDefinitionAceOrder values within a given
        ACL need not be contiguous."

::= { qos802AclDefinitionEntry 4 }

END

${this.title}

Code Editor : QOS-POLICY-802-PIB